Connect Tuya / Smart Life

Set up the connection

1. Open Tuya / Smart Life from your home’s Integrations screen. On web, choose Integrations. On iPhone and Android, choose Settings, then Integrations.Integrations
2. On the Tuya / Smart Life screen, confirm that the connector is available for your home and read any limits shown before you continue.
3. Enter the Data centre that matches your Tuya IoT Platform project. The visible choices are Western America, Eastern America, Central Europe, Western Europe, India and China.
4. Enter the Access ID from the project’s Overview page.
5. Enter the Access Secret from the same project. This field is sensitive.
6. Choose Connect.Connect

What you should see afterwards

After the connection is accepted, ALYT shows the discovered items for that Tuya / Smart Life connection. If Look for Tuya devices is offered, you can use it to refresh the list. Open a device to review the state ALYT has for it.

Limits

• ALYT obtains each device’s local key from the provider and uses the supported local device path.
• No personal Tuya account password is entered in this form.
• A hosted account by itself does not make local devices reachable.

Troubleshooting

1. If a field is wrong, correct the specific item named in the error and try again.
2. If the connection does not complete, check the Data centre, Access ID and Access Secret first.
3. If devices do not appear after you connect, use Look for Tuya devices when it is available.Look for Tuya devices
4. If the home still cannot reach local devices, the connection you have is not enough for this home and you should use Support.
5. To remove the connection, choose Disconnect, read the consequence and confirm the named Disconnect action. Keep cancels without removing anything.