Hub LED night mode

Turn LED night mode on or off

1. Open the hub device page for the hub you want to change.
2. Open More, then Configuration. On web, this appears on the hub detail page. On iOS and Android, it appears in the same Configuration card.
3. Find LED night mode and switch it on or off as needed. This is a hub preference, not a room lighting setting and not a home alarm mode.
4. Wait for the save to finish before leaving the page.

When you turn LED night mode on, the hub dims its lights after sunset. Mute and fault indicators stay visible.

What you should see afterwards

• The LED night mode switch shows the current preference.
• If the save succeeds, the page keeps the new preference.
• If the save fails, the previous preference stays in place until you try again.

Troubleshooting

• If LED night mode is missing, this hub has not exposed the capability on this device.
• If the switch is present but disabled, only the household manager can change it.
• If a save does not complete, check your connection and try again from the same Configuration card.
• If the hub is offline, a saved preference does not confirm that the hub has already applied the change.