Use coffee, vacuum and watering controls

WebiPhoneAndroid

Use the coffee machine, vacuum and irrigation controls from your home device page. Only the controls your device actually reports will appear, and readings are separate from controls.

Coffee machine

Use these controls on the coffee machine device page when they are shown: Power, Brew, Stop and Target temperature. Temperature, Brewing and Pods since reset are readings, not controls.

  1. Turn the machine on with Power if it is off and you want to prepare a brew.Power
  2. Select Brew when the machine is on and you want coffee. Choose the dose your device shows, then wait for the machine to begin.Brew
  3. Use Stop if you need to end the brew early. If the machine is already brewing, Stop ends the current pour.Stop
  4. Adjust Target temperature only if your device shows that control. The machine may show its current Temperature beside the target.Target temperature

Vacuum

Use the vacuum page for cleaning and docking. The available controls are Start, Pause, Return to dock and Suction. Activity is a reading.

  1. Press Start to begin cleaning.Start
  2. Press Pause to stop the robot temporarily.Pause
  3. Press Return to dock when you want the robot to go home and charge.Return to dock
  4. Choose Suction only from the options your device shows. The supported options are Quiet, Standard and Max.Suction

Irrigation

Use the irrigation page to start or stop Watering and to choose a Zone when the device provides one. Next run is a reading, not a schedule editor.

  1. Press Watering to start or stop watering, depending on the device's current state.Watering
  2. Choose Zone only from the zone choices your device shows.Zone
  3. Read Next run if you want to check the next reported watering time.

Troubleshooting

Unknown means no valid reading, not Off or zero. If a control does not appear, your device has not reported it on that page. If a change stays pending, waiting, or not confirmed, do not repeat the same request as a test.

  • Check that you opened the correct device page in your own home.
  • Use only the controls that appear on the page.
  • If the device is unreachable, check power and the connection shown on the device page.
  • If ALYT shows a command as pending or not confirmed, wait for the device to answer before trying again.
  • Use Support with the room, device name and the problem you observed.

Updated 2026-09-29 · Guides are written in English and mirror exactly what your home shows.

Related guides

Find and manage your devicesUse Devices to find the physical devices in your home, open a device for its available controls and details, and manage its name, room, dashboard pin, connection status, and supported recovery options.WebiPhoneAndroid Organize rooms and their devicesUse the Home screen to add rooms, change room settings, move devices, and merge or remove rooms in your own ALYT home.WebiPhoneAndroid Find help and describe a problemUse Support to find homeowner guides, request help, or ask for an appointment when your home has an installation partner. The available controls are Request support and Request an appointment, and the form you see depends on the kind of home you have.WebiPhoneAndroid

Still need a hand?

Request help from inside your ALYT home, or use the contact form below.

From your home

Sign in, open Settings, then Support. Describe the problem and add up to three screenshots; it reaches ALYT support with your home attached.

Sign in to request support

Write to us

One form, read by a person. Say which room and device, what happened and what you expected.

Open the contact form

Service status

Check whether the platform is healthy before you troubleshoot at home.

status.alyt.com

Security disclosure

Found a vulnerability? Report it responsibly.

Security and disclosure